Do you have the “Getting Windows ready” stuck on your computer? If so, you’re not alone, a lot of people seem to be encountering this “Getting Windows Ready” message that won’t go away.
Don’t worry – there are ways to fix it. In this blog post, we’ll go over some of the possible solutions to help get your computer running smoothly again. This can be extremely frustrating, especially if you don’t know how to fix it. In this post, I’ll outline some potential solutions that might help you resolve the issue.
Table of Contents
Causes for windows Stuck on Getting Windows ready
There are no known causes of the message “Getting Windows ready” stuck on the screen. It restarts the computer and hangs at 1%. The user has to force restart the computer. But still, we have managed to find some of the causes which are stated below:
1. One of the most common causes of this problem is a lack of storage space. Your computer might not be able to finish installing updates or getting ready for Windows 10 if it doesn’t have enough free space. You can try freeing up some space on your hard drive by deleting old files, emptying the recycling bin, or uninstalling unused programs.
2. Sometimes, antivirus programs can conflict with the installation process and cause the “Getting Windows ready” message to appear. If you’re not currently using antivirus software, you can try disabling it to see if that may resolve the issue.
3. Out-of-date drivers can sometimes cause conflicts with the installation process. It’s a good idea to update your drivers regularly to avoid any potential conflicts.
How To Fix Getting Windows Ready Stuck?
Now that we know some of the possible causes, let’s go over some solutions to help you fix the “Getting Windows ready” stuck on your computer. We will also add some solutions that you can do to avoid getting this error in the future.
1. Wait for some time
This is the most generic solution to any update installation problem. The users are advised to wait for some time, sometimes it may take hours and in some cases, it may take a few minutes for the updates to install properly. Because windows stuck on getting windows ready usually happens due to some issue with the updates, by waiting, you might be able to let the updates install properly and resolve the issue.
But if the updates are taking too long or if the computer is not responding, then you can try some of the other solutions given below.
2. Shut down and Power Reset
If waiting doesn’t work, you can try shutting down the computer and power resetting it. A power reset deletes any temporary files and changes that might be causing the problem, without affecting your personal files.
To do a power reset:
- Unplug all the devices like USB cable, Disk, or anything.
- Shut down your computer entirely and wait for a few seconds.
- Press and hold the “Power” button on your computer for about 30 seconds to 1 minute. This will drain any residual power from the computer.
- Then remove the power cable or battery if you have a laptop that has a removable battery.
- After that, plug in all the devices and reattach everything.
- Once the power is drained, press the “Power” button again to turn on your computer.
See if it fixed the error or not and If you are still getting the same Getting Windows Ready error, then try the next solution.
3. Check Your Internet Connection
If you are trying to install updates and you’re stuck on the “Getting Windows ready” message, it’s possible that your internet connection is the issue. The first thing you should do is check to see if your computer is connected to the internet. You can do this by opening a web browser on the same internet network and navigating to a website. If the website loads, then your connection is working.
If the website doesn’t load, you can try restarting your router or modem to see if that helps. If you’re still having trouble connecting, you can contact your ISP for assistance. Once you’ve confirmed that your internet connection is working, try installing the updates again and see if the issue is resolved.
4. Disable Automatic Updates
You should also Disable Automatic Updates and if you think an update is important then you should do it manually. This might sound like a strange solution, but it’s actually worked for some people. If the above solutions don’t work, you might want to try disabling automatic updates. This will prevent your computer from downloading and installing updates automatically.
To do this, go to Settings and click on Update & Security. Now, click on Advanced options and select the option that says “Let me choose how updates are installed.”
Now, under Important Updates, select the option that says “Never check for updates (not recommended).” Click on Save Changes and restart your computer. Restart your computer and see if that fixes the problem.
5. Uninstall Recently Installed Update
If you face the Getting Windows Ready stuck error right after installing a new update, it is most likely that the newly installed update is the culprit. So you should only install updates that are very necessary and if You don’t know how to uninstall the recently installed update, follow the steps below:
Step 1: Press the Windows key + I to open Settings.
Step 2: Click on Update & Security.
Step 3: Click on Windows Update in the left-hand pane. In the right-hand pane, click on View update history.
Step 4: Locate the recently installed update and double-click on it to uninstall it.
Step 5: Once the uninstallation is complete, restart your computer. This should fix the Getting Windows Ready stuck error. If not, continue to the next method.
6. Run System File Checker
If you’re still seeing the “Getting Windows ready, Don’t turn off your computer” message, it’s possible that there is a system file corruption causing the issue. You can run the System File Checker tool to scan for corrupted files and repair them. Here’s how:
- Open Cmd and run it as administrator
- In the command prompt, type sfc /scannow and press Enter.
- The scan may take some time to finish, so please be patient.
- Once the scan is complete, restart your computer and see if the issue persists
7. HDD Scan and Repair
In some cases maybe running System File Checker will not fix the “Getting Windows ready, Don’t turn off your computer” error, which means it’s possible that there are bad sectors on your hard drive causing the issue. You can use a tool like HDDScan to scan for and repair bad sectors on your hard drive.
- Download and install HDD Scan.
- Launch the program and select your hard drive from the list.
- 3Click the Start button to begin scanning for bad sectors.
- Once the scan is complete, restart your computer and see if the issue persists.
8. Run Windows Repair Services
The next thing you can do to prevent this error is to run the Windows Repair tool. It is used to scan and repair corrupt files. This tool can fix a variety of issues with your Windows installation, including the Getting Windows Ready stuck issue. Windows Repair is a free program that you can download from the official Microsoft website.
Here’s how to use the Windows Repair tool:
- Download and install the Windows Repair tool.
- Run the program and select Create Restore Point.
- Click on the Scan button to start scanning for issues.
Once the scan is complete, click on Apply Repairs to fix the issues founds work, you can try resetting Windows. This will keep your personal files, but it will remove all apps and settings from your computer. It’s a good idea to create a backup of your personal files before proceeding as you never know what can go wrong.
- To reset Windows, go to Start > Settings > Update & Security.
- Then select Recovery from the left menu.
- In the right pane, under Reset, this PC, select Get Started.
- Select Keep my files and follow the on-screen instructions to reset Windows.
9. Use the Startup Repair Tool
Startup Repair Tool is a built-in tool in Windows that can be used to fix a variety of issues, including the Getting Windows Ready stuck error. To use this tool, you need to have a Windows installation disc or USB drive. If you don’t have one, you can create one using another computer. Once you have the installation disc or USB drive, follow the steps below:
- Insert the installation disc or USB drive and restart your computer.
- Press any key to boot from the installation media.
- On the Install Windows screen, select your language, time and currency format, and Keyboard or input method.
- Click Next, On the next screen, click Repair your computer.
- On the Choose an option screen, click Troubleshoot.
- On the next screen, click Advanced options.
- On the Advanced options screen, click Startup Repair.
- The Startup Repair tool will now scan your computer for issues and try to fix them.
- Once it’s done, restart your computer and see if the issue is fixed
10. Perform a Hard Shutdown
If none of the above methods work, your only option is to perform a hard shutdown. Remember you should only perform a hard shutdown if all the above methods did not work for you. This will shut down your computer forcefully and you will lose any unsaved data. To do this, simply press and hold the power button for 5 seconds or until your computer turns off.
Once your computer has been turned off, wait for a few seconds and then turn it back on. This should fix the Getting Windows Ready stuck error.
11. Perform a Factory Reset
A Factory reset is a last resort option for fixing the Getting Windows Ready stuck error. This will erase everything from your computer and you will lose all your personal files, this will also reinstall Windows on your computer.
To perform a factory reset you will need a USB or DVD drive. If you don’t have a USB or DVD drive, then you can create a bootable USB drive using another computer. Once you have the bootable USB drive, just follow the steps below:
- Connect the USB to your computer and restart your device.
- On booting up, keep pressing the F9 or ESC key (depending on your manufacturer) to go into the Boot Options menu.
- Now select the USB drive from the list and hit Enter.
- Now on the “Install Windows” screen, select the “Repair your computer” option located at the bottom of the screen.
- On the next screen, select Troubleshoot > Advanced options > Command Prompt.
Once Command Prompt is open, type these commands:
- bootrec /fixmbr
- bootrec /fixboot
- bootrec /rebuildbcd
- exit
After typing the above commands, just restart your computer and see if it boots up properly.
12. Restore Windows Operating System
Restore Windows is a built-in tool in Windows that allows you to roll back to a previous state where it was working properly. This can be useful if you recently installed an update or driver that is causing issues with your computer. To Restore Windows to its previous version follow the steps –
- Go to troubleshoot and then select Advanced options
- Select system restore
- Be patient because it can take some time for
- System Restore to load.
- Click Next and then select the most recent restore point from the list.
- Click Next and then follow the on-screen instructions to complete the process.
- After restoring Windows, check if the Getting Windows Ready issue is fixed.
13. Reset Windows update components
Getting Windows Ready stuck error occurs after installing or using Windows Updates, it’s possible that some of the update components on your computer are corrupted or not working properly. To prevent this problem in the future, you can try resetting the Windows Update components.
This process will stop and start the Windows Update service, delete temporary files that may be causing problems, and re-register files that are needed for Windows Update to work correctly. Here’s how to reset the Windows Update components:
1. Press the Windows key + R on your keyboard to open the Run dialogue box.
2. Type “services.msc” into the Run dialogue box and press Enter. This will open the Services management console.
3. In the Services management console, find the Windows Update service and right-click it. Then, select Stop from the menu.
4. Once the Windows Update service has been stopped, open File Explorer and navigate to the following directory: C:\Windows\SoftwareDistribution\Download
5. Delete all of the files in the Download directory.
6. Now, go back to the Services management console and find the Windows Update service again. Right-click it and select Start from the menu.
7. Once the Windows Update service has been started, open a Command Prompt window as administrator. To do this, press the Windows key + X on your keyboard and then select Command Prompt (Admin) from the menu.
8. In the Command Prompt window, type the following commands, pressing Enter after each one:
- netsh winhttp reset proxy
- netsh advfirewall reset
- netsh advfirewall set allprofiles state on
- ipconfig /flushdns
9. Close the Command Prompt window and restart your computer.
14. Delete Problematic Files
So you have restarted your computer and now it is showing the boot options page. On this page, you will see a few options
- Turn off your pc
- Troubleshoot
- Use another Operating system
- Select Troubleshoot option and then select and Advance option
- In the advance option click on Command prompt
- Then type this C: cd Windows\System32\LogFiles\Srt. SrtTrail.txt in your cmd and hit enter
- If you see the message that “Boot critical file c:\windows\system32\drivers\vsock.sys is corrupt,” you can use the Command Prompt to delete the problematic file by navigating to the specified location and entering the “Del” command.
15. Disk Cleanup Tool
Sometimes Deleting Problematic Files won’t help in preventing different errors because there could be a hardware issue causing the issue.mesatic files, it’s possible that there is an issue with your hard drive. You can use Disk Cleanup to delete these files.
It’s important to note that Disk Cleanup will delete some system files, so make sure you know what you’re doing before proceeding. Here’s how to use the Disk Cleanup tool:
- Go to Start > type “disk cleanup” > select Disk Cleanup.
- Then the drive that you want to clean up and select OK.
- In the next window that opens, select the types of files that you want to delete and select OK.
- In the disk cleanup window, select the Files to delete the section.
- Check the boxes for the types of unnecessary files you want to delete and click OK.
- The disk cleanup tool will now start deleting the selected files.
- The process may take some time to finish, so be patient.
- Once the process is complete, restart your computer.
FAQs
How to Perform Windows 10 Startup Repair?
When you face the issue of your computer getting stuck on the “Getting Windows Ready” screen or “Please wait for the System Event Notification Service” screen during startup in Windows 10, 8.1, and 7.
Startup Repair is a Windows 10 recovery tool that can fix certain system problems that might prevent Windows from starting properly. If your computer is stuck on the “Getting Windows Ready” screen, it might be due to a driver issue, a system file corruption, or some other problem. Performing a Startup Repair should fix the problem and allow you to boot into Windows properly. Here’s how to do it:
- Boot from your Windows 10 installation media.
- On the “Choose an option” screen, select “Troubleshoot”.
- On the “Advanced options” screen, select “Startup Repair”.
- Wait for Startup Repair to scan your computer for problems and fix them.
How long does it take for Windows 10 to getting ready?
Assuming that you have a fast internet connection, it should only take a few minutes to download and install the updates. However, if you have a slow connection or are installing a large update, it could take longer. But in some cases it can take up to a few hours, So don’t turn off your computer!
What causes the Windows 10 getting ready loop?
There could be a number of reasons why your computer is stuck in the “Getting Windows ready” loop. It could be a problem with the updates that are being installed, or it could be a problem with your computer’s hardware.
Why my pc is showing a black screen?
If you’re seeing a black screen with nothing on it, that means your computer isn’t outputting video to your monitor. This is most likely due to a problem with your computer’s hardware or graphics drivers. To fix this, you’ll need to troubleshoot your hardware and drivers.
Why is my computer restarting again and again?
There are several reasons why your computer might be stuck in a loop of restarting. It could be due to a problem with your computer’s hardware, a software issue, or even a virus. If you’re not sure what the problem is, it’s best to take your computer to a qualified technician to have it diagnosed.
What should I do if my computer is taking a long time to startup?
If your computer is taking a long time to start up, it could be due to a number of factors. It could be that you have too many programs installed on your computer, or that your startup settings are incorrect.
How can I speed up my computer?
There are a number of ways to speed up your computer. You can try uninstalling unnecessary programs, running a virus scan, or defragmenting your hard drive. You can also try upgrading your computer’s hardware, such as adding more RAM or a faster processor.
Conclusion
In this article, we have looked at various methods that can be used to fix the Getting Windows Ready stuck error. These are some of the most effective methods that can be used to fix the Getting Windows Ready stuck error. Hopefully, one of these methods will work for you and you will be able to access your computer again. If you have any questions or suggestions, feel free to leave us a comment below.